Can be used in all 4-stroke motorcycle engines, including racing, high performance, street, and off road motorcycles...

 

I recently SiC treated a 1100cc motor on a 1984 Honda v65 Sabre VF100S and began with these compression numbers:

Cylinder #1: 120/170 Cylinder Read more

Robert Kientop 1984 Honda v65 Sabre VF100S Wednesday, October 14, 2015

Dear Great Cerma Product, I have just used the transmission and engine treatment. So Far So Good. I notice an improvement with the transmission, and the Read more

Robert F. Chevy 1998 Venture LS Monday, December 21, 2015
Motorcycle

I was your biggest skeptic. I bought the Cerma Engine Treatment because of how passionate you were about the product. It has been sitting on my toolbox Read more

Joe M. Joe M. Branford, CT Sunday, July 17, 2016
2006 Chevy Equinox

Hello John,

My Cerma Story #1) Treated a Chevy a week ago. Someone very close to me, I cannot disclose who, got out of the car today and removed some Read more

Ian Roe 2006 Chevy Equinox 6 cyl with 88,000 km Thursday, June 9, 2011
Ford F-150

The amazing Cerma technology! The reason I say amazing is because I worked at Douglas Aircraft in the engineering changes on the DC-9 program way back Read more

Capt. Gary Pylant Ford F-150 Thursday, September 3, 2015
2004 Ford Edge

Hello Jim,

I would like to thank you for introducing me to Cerma and to such a quality product.

I am a certified Automotive Service Excellence  Read more

Robert Wilder 2004 Ford Edge Tuesday, June 5, 2012

I've tried them all and Cerma is by far the best product on the market! Better fuel economy, my engine runs smother and quieter than when I had it rebuilt, Read more

David T 2002 Lexus RX 300 Sunday, September 7, 2014

Purchased a 1990 Buick Reatta with 143,000 miles on it. It runs great and can only run better with the Cerma products I just purchased (Cerma Engine Value Read more

Raul Y. 1990 Buick Reatta Friday, June 10, 2016
Subaru Imprezza

I am amazed at this product. I put Cerma STM-3 in my 2009 subaru imprezza and went from 33 mpg hwy. to 38 hwy! the engine seems to be so smooth you can't Read more

Brent Richards 2009 Subaru Imprezza and 04 Dodge Hemi Sport Truck Tuesday, September 11, 2012
1993 Mustang Motor in a 1993 Miata

My car has a 1993 mustang motor and 5 speed transmission in a 1993 miata. I put both the engine additive and the gas treatment in the car at nearly the Read more

J. Dwight 1993 Mustang Motor in a in a 1993 Miata Saturday, October 5, 2013
2015 Volvo Day Cab

I just wanted to tell you about my Volvo semi that I drive. It is a 2015 Volvo Day Cab with A/T. It now has 39,500 miles on it. I treated it at about Read more

Chad S. 2015 Volvo Day Cab with A/T Tuesday, September 29, 2015
BMW 318i

Hi everyone!

This post is a "give back" I hope to help a few with this one, as so many helped me with replies on my first post. I learned much. At Read more

Mike Wentz '83 BMW 318i Friday, August 7, 2009
Ford Escape

We drive a 2005 Ford Escape that we leased new. The sticker for mileage said 19 city 22 hwy and we got an average of 20.5. We tried the cerma with stm3 Read more

Mike and Dea Shoars 2005 Ford Escape Saturday, March 8, 2008
Alliant Energy

We have used Cerma in a gear box which is 1 of 2 identical units. The one
we treated was initially running 60 decrees hotter than the other one. We want Read more

Eric Krahenbuhl Alliant Energy, Emery Generating Station Monday, July 16, 2012
2015 Denali 2500

Amazing!! This stuff really works as described and then some. I used it three 2015 GMCs (Denali 1500, Denali 2500, and Yukon XL). Smoothed out the idles Read more

Amazon Customer 2015 Denali 2500 Wednesday, December 23, 2015
40 FT Meridian Yacht

The boat is going over 28 MPH. Granted clean bottom and props but I don’t believe it ever went over 26ish on this boat. It is a 40 FT Meridian Yacht weighing Read more

Leigh Overland 40 FT Meridian Yacht Wednesday, June 4, 2014

Bought it used in February, added the motor treatment as I left the dealer. Have averaged 41mpg since I bought it, 18% improvement over the highway rating Read more

Mitch Jewett 2016 Toyota Camry LE 4 cylinder Thursday, August 9, 2018
2008 Ford Transit Diesel 2.4Ltr Turbo Van with 155,000km

Update from NZ on Cerma: Hello, December last year I purchased several products from you. I changed my oil ran the vehicle for a while the added Cerma. Read more

Glen M. 2008 Ford Transit Diesel 2.4Ltr Turbo Van with 155,000km Saturday, March 21, 2015

Wanted to update on the Lancer. We are 2k miles into the cerma max 5w40 oil and I pulled the dipstick... No joke it looks like I just did the oil change. Read more

Turbomatte Mitsubishi Lancer Thursday, June 12, 2014
1990 560 SEC Benz

I never bother writing reviews, however, this product is FANTASTIC!! 560 SEC Benz with 113k miles, about 30k since valves...UNBELIEVABLE!! Cold start Read more

Pdidheon 1990 560 SEC Benz Monday, March 23, 2015
1998 Dodge Diesel Pickup

I treated my 1998 Dodge Diesel Pickup with 6 oz Cerma Engine| Treatment and the engine smoothed up and has much more power. I am very satisfied with this. Read more

Charles Penner 1998 Dodge Diesel Pickup Wednesday, February 29, 2012
2004 Ford F350 6.0

Works. 'Lil spendy but damn worked. Bought In april 2014 used in my '04 6.0 F350 4x4 an put some in my dad's dodge '05 3500 5.9 he even commented + on Read more

D. Watson 2004 Ford F350 6.0 Tuesday, March 8, 2016
Mack 350

This stuff is crazy good although I need to replace injection pump on my Mack 350. This product made the truck run the best it has done for a year. Almost Read more

Peter P. Mack 350 Sunday, July 24, 2016
Honda 1300 Shadow

I am the guy who spoke with you at length and purchased some fuel treatment, oil additive and gun lube. I put the fuel and oil additives in immediately. Read more

Kurt P. Honda 1300 Shadow Friday, June 24, 2016

At first I thought this was another slick50 type product but after checking out the website and finding no bad reviews I said what the heck let me try Read more

Anthony Salon 1988 Mercury Cougar XR7 Friday, July 5, 2013
Dipstick

Well its finally complete,.. my VT has been engine treated, 6000 mi. ran in, and turbo treated, 6500 miles ran in. 7500 mi. can around, the "carrier" Motul Read more

Peter K. (aka Gaijii) From Veloster Forum -- CERMA Treatments/Oil/Lubricants: For the good of the order Saturday, December 28, 2013
2010 BMW 550i

Hi, After 2000 miles my 2010 BMW 550i it runs better, no engine noise and 2-3 more MPG. Thanks ! -- Stephen K.

Steven K. 2010 BMW 550i Tuesday, March 8, 2016
  • Cerma STM-3
    Technology and
    Information

    Learn More
  • Cerma Motor Oil
    Technology and
    Information

    Learn More
  • Cerma Blue Ice
    Technology and
    Information

    Learn More