• Save 27%
Cerma Gun CSL Kit

Cerma C•S•L Firearm Foam and Grease

MSRP: $109.25  
$79.29
You save: $29.96 (27%)
QUANTITY DISCOUNTS - Add to Cart for Discount to Display:
Quantity 2+ 5+
Your Price $75.33 $71.35

Cerma CSL Firearm Clean Seal Lube

Cerma STM-3® CSL Firearm Foam and Grease - sold as a package or individually.

Cerma utilizes SiC technology to form a micro-ceramic seal on all metal parts to reduce friction, remove carbon, copper and lead deposits, and clean old oil from firearms, loaders and loading tools.  Cerma leaves behind a SiC finish that treats the metal to create a matrix that is impervious  to heat, cold and buildup, with 6x the load carrying capacity of US Military required specifications.

Cerma CSL Firearm Foam will reduce friction, wear, and abrasion, while providing unmatched protection.  Just clean firearm as normal, Cerma is all the protection you will ever need. Cerma CSL Firearm Foam is not your ordinary gun cleaner, Cerma CSL is a new generation of lubrication and protectant fortified with STM-3 technology.

Cerma CSL Firearm Grease is engineered to meet the most demanding needs for firearm lubrication and protection. Prevents metal damage in actions, shotgun hinges and hardware, frame rails and bolt-action locking lugs. Quick and easy to apply. Will cling to metal and will not wash off with water.  Works in extreme temperatures -60°F to 350°F.

Benefits:
•   Increased Velocity and Better Grouping  
•   Cleans, Seals, Protects and Lubricates  
•   Helps Remove Carbon, Copper & Lead Deposits  
•   Reduced Jams, Increased Performance  
•   Superior Corrosion Protection / Prevents Rust and Oxidation
•   Extends Barrel Life •  Extreme Temperatures (Hot and Cold)  
•   Smoother Action   •  Lower Barrel Temps, typically 25°F to 100°F
•   Easier and Faster Cleaning (Less Buildup)  
•   Reduced Maintenance Costs  
•   Water-Resistant, won't Break Down or Dry Out  
•   Restores Surface Metal Imperfections  
•   Extended Shooting Time Between Cleanings  
•   Safe on all Metals, won’t Etch or Pit Barrels  
•   Powerful & Fast Acting • Non-Flammable,  Non-Corrosive
•   Stays in place and lubricates in the most severe conditions
•   Excellent Water and Chemical Washout Resistance
•   Easy to Use  
•   Odorless After Application  
•   American Innovation & American Made

Cerma CSL products are environmentally safe and do not contain any solvents or PTFE's.

Norwalk CT Police Department Usage Review of Cerma CSL Firemarm:
I must admit that I tend to view products with skepticism however the proof was in the data.  I saw a legitimate 200 fps gain in a 16” AR-15 that would be the equivalent of having a 20” barrel, as well as a legitimate 150 fps boost in a 40 cal Sig P-229R. Now when cleaning time came around, both guns pretty much wiped clean with minimal fuss.  I am looking forward to continued use of Cerma and can see that it also has potential for USPSA shooters who have to meet a minimum power floor providing extra velocity without pressure increase.

Thanks,
Corey Vento- Police training officer
Norwalk CT Police Department
203 xxx-xxxx
 
Instructions - Cerma CSL Firearm Foam:

SHAKE WELL BEFORE USE
Cerma Technology works by utilizing three parts:
Carbon (dirt), Water, and Heat.  For best performance, follow the instructions so that all three elements are properly utilized and the Cerma process completes itself.

Part 1 - Carbon / Dirt:  Do not Pre-Clean firearm prior to application of Cerma, for AT LEAST 48 hours prior.
Do NOT use any other cleaner while you are using Cerma CSL
as your firearm cleaning protocol.

Part 2 - First Time Cleaning
1) SHAKE WELL BEFORE USE
2) Insert Straw into Spray Tip of Aerosol Can
3) Point Straw into Barrel of Firearm and Spray
4) When Foam Starts to Come Out of Action Area, STOP Spraying
5) Let Cerma Sit for 20 Minutes without Wiping or Cleaning
7) After 20 Minutes, Swab out the Foam with Clean Dry Swab
8) Using Another Swab Saturated with Room Temp Water,
Swab Barrel Again - this is the “Water” Element
9) As soon as Possible, Take Firearm Out and Fire Until
Barrel is Warm to Hot - this is the “Heat” Element
Note:  DO NOT Use Any Other Cleaner while using Cerma CSL.

Part 3 - Follow Up Cleanings
1) Repeat Steps 1 to 4 Above
2) Let Cerma Sit for 5 Minutes without Wiping or Cleaning
3) After 5 Minutes, Swab out the Foam with Clean Dry Swab
NO need to Swab again with Wet Swab,
NO need to take the Firearm out and Immediately Fire.
Note:  DO NOT Use Any Other Cleaner while using Cerma CSL.

Instructions - Cerma CSL Firearm Grease:

Take off tip and inject sparingly into the firing and action area of the firearm. No need to wipe off unless you have over applied.

Money Back Satisfaction:
not applicable
Return Period:
30 Days (Unopend, Unused)
Size:
6 oz Foam / 15cc Grease
UPC:
650019151004 / 650019151011

You may also be interested in the following product(s)