Cerma Value Package for Diesel Pick-Up Truck
Save money by purchasing Engine Treatment and Motor Oil in a "Value Package" (available for a limited time). Big savings from purchasing items individually.
Diesel Engine Value Package for Pick-Up Trucks is our best value to bring engine to peak operating levels, and includes:
One (1) Cerma STM-3 6oz Engine Treatment, and
Twelve (12) Quarts of CERMAX Synthetic Motor Oil (choose viscosity and additional oil quantity if needed)
Additional Options:
One (1) 2oz TransmissionTreatment if Transmission option and type Chosen
I) The Cerma Protocol:
1. Use treatment first! Add treatment to existing oil (not Cerma Oil)
2. If your engine has less than 30,000 miles, add only 3oz of the Engine Treatment to your existing engine oil. If 30,000 plus miles then add full 6oz bottle. To add to the engine oil, best method is to add when engine is warm and while it is running at idle. If blow back is present, shut off engine, add treatment to oil and start engine immediately. After adding, do not shut off vehicle. Idle at 2000 rpms for 2 to 3 minutes and then drive car for a minimum of 15 to 20 minutes. It is preferred to drive in city stop and go traffic for the first 10 minutes, then freeway or high speed driving for 10 minutes. Cerma uses all rpm ranges to provide proper distribution of the technology.
2. Put a minimum of 3,000 miles after adding engine treatment and before oil change interval (next step).
3. Change oil using CERMAX Motor Oil. (Do Not utilize any other additives while using Cerma branded Oils)
4. Your part of the process is now complete. Over the next 90 days of driving, the Cerma process will complete its process on its own.
***IMPORTANT: DO NOT ADD TREATMENT AND CERMAX OIL AT THE SAME TIME! ADD TREATMENT, DRIVE A MINIMUM OF 1,500 MILES AND THEN CHANGE OIL WITH CERMAX MOTOR OIL.